SC28L194A1A,529
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 68-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Feature | Internal Oscillator, Timer/Counter |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 68 |
| Terminal Finish | TIN |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY AT 20 MHZ |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 3.3V 5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SC28L194A |
| Pin Count | 68 |
| JESD-30 Code | S-PQCC-J68 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4, QUART |
| Number of I/O | 4 |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 33MHz |
| Supply Current-Max | 35mA |
| Address Bus Width | 7 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 4.57mm |
| Length | 24.23mm |
| Width | 24.23mm |
| RoHS Status | ROHS3 Compliant |
SC28L194A1A,529 Overview
There is a cost-effective package 68-LCC (J-Lead) available.The transmission of data takes place over 4, QUART channels.Tube is adopted for packaging.Its uPs/uCs/Peripheral ICs use SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.In order to configure this device, 68 terminations are used.For its operation, a voltage of 5V is provided as the supply voltage.This electronic part is Obsolete at present.There are 4 serial I/Os available for communication of data.A method of mounting it is through Surface Mount.There is a voltage supply of 0 volts for the device.An IC with 68 pins is what this device is.The clock frequency of this IC is measured at 33MHz.UART possesses some characteristics of Internal Oscillator, Timer/Counter.The device is capable of operating at a maximum temperature of 85°C.Furthermore, it is also capable of ALSO OPERATES AT 3.3V SUPPLY AT 20 MHZ.Basically, it uses SC28L194A as its base part number.The device can operate at a temperature of -40°C.A total of 4 I/Os are available for data transfer.Supply currents at 35mA are considered acceptable.
SC28L194A1A,529 Features
4 serial I/Os
Clock frequency of 33MHz
ALSO OPERATES AT 3.3V SUPPLY AT 20 MHZ
4 I/Os
SC28L194A1A,529 Applications
There are a lot of NXP USA Inc. SC28L194A1A,529 UARTs applications.
- Factory Automation
- Cellular Phones DataPort
- Factory Automation and Process Controls
- Battery Operated Electronics
- Network Management
- Handheld Terminal
- Point-of-Sale Systems
- Communications equipment
- Ethernet Network to Serial Ports
- Factory automation and process control
