SC28L202A1DGG/G:11

5V V 1.2mm mm 6.1mm mm 85°C °C Interface - UARTs (Universal Asynchronous Receiver Transmitter) 14mm mm CMOS 56 260 56

Manufacturer: NXP USA Inc.
Nocochips NO: 568-SC28L202A1DGG/G:11
Package: 56-TFSOP (0.240, 6.10mm Width)
Datasheet: PDF
Stock: 939
Description: 5V V 1.2mm mm 6.1mm mm 85°C °C Interface - UARTs (Universal Asynchronous Receiver Transmitter) 14mm mm CMOS 56 260 56 (Kg)

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	56-TFSOP (0.240, 6.10mm Width)
Surface Mount	YES
Packaging	Tube
Published	2003
Series	Impact
JESD-609 Code	e4
Feature	Configurable GPIO, Internal Oscillator, Timer/Counter
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	56
Terminal Finish	NICKEL PALLADIUM GOLD
Additional Feature	ALSO OPERATES AT 3.3V SUPPLY
HTS Code	8542.31.00.01
Technology	CMOS
Voltage - Supply	3.3V 5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	SC28L202A
Pin Count	56
JESD-30 Code	R-PDSO-G56
Qualification Status	Not Qualified
Operating Temperature (Max)	85°C
Operating Temperature (Min)	-40°C
Temperature Grade	INDUSTRIAL
Number of Channels	1, UART
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	50MHz
Address Bus Width	7
Protocol	RS485
Boundary Scan	NO
Low Power Mode	YES
External Data Bus Width	8
Data Rate (Max)	3.125Mbps
Number of Serial I/Os	2
Bus Compatibility	68XXX; 80XXX
Data Transfer Rate-Max	0.375 MBps
Data Encoding/Decoding Method	NRZ
FIFO's	256 Byte
With Modem Control	Yes
Height Seated (Max)	1.2mm
Length	14mm
Width	6.1mm
RoHS Status	ROHS3 Compliant

SC28L202A1DGG/G:11 Overview

UART is available in the cost-effective 56-TFSOP (0.240, 6.10mm Width) package.UART is possible to transmUART on 1, UART channels.In terms of packaging, Tube is adopted.Its uPs/uCs/Peripheral ICs use SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.Configured with 56 terminations.For its operation, a voltage of 5V is provided as the supply voltage.In the present state, this electronic part is Obsolete.Data communication is supported by 2 serial I/Os.You can mount it by using Surface Mount.There is a voltage supply of 0 volts for the device.Electronic devices such as this are known as 56-pin integrated circuits.This IC measures its clock frequency at 50MHz.There are some characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter in it.Temperatures up to 85°C are possible to operate it.In addition, it has the capability of performing ALSO OPERATES AT 3.3V SUPPLY.There is a default setting for the base part number of the part to be SC28L202A.A minimum temperature of -40°C is required to operate it.The electronic component has been classified as a member of the Impact series.