SCC2691AC1N24-S
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| JESD-609 Code | e3 |
| Number of Terminations | 24 |
| Terminal Finish | TIN |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 1 |
| Nominal Supply Current | 2mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 4MHz |
| Data Rate | 115.2 kbps |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 1 |
| Data Transfer Rate-Max | 0.0046875 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| Height Seated (Max) | 4.7mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SCC2691AC1N24-S Overview
This product is available in a cost-effective package called PDIP.The transmission of information is carried out through 1 channels.Its uPs/uCs/Peripheral ICs use SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.In order to configure this device, 24 terminations are used.The device operates at 5V voltage.Data communication is handled by 1 serial I/Os.An IC with 24 pins is what this device is.The clock frequency of this IC is measured at 4MHz.To maintain normal work for a long time, the operating temperature should not exceed -40°C.The operating temperature should be in excess of 70°C to ensure the normal work for a long time.UART is possible to ensure reliabilUARTy by keeping the supply voltage below 5.5V.Reliability can be ensured when the supply voltage is kept above 4.5V.The supply voltage of 5V is provided for its high-efficiency operation.Transferring data is not possible with 1 I/Os.
SCC2691AC1N24-S Features
1 serial I/Os
Clock frequency of 4MHz
Operating supply voltage of 5V
1 I/Os
SCC2691AC1N24-S Applications
There are a lot of NXP Semiconductors / Freescale SCC2691AC1N24-S UARTs applications.
- Battery Operated Instruments
- Remote Access Servers
- Cellular Phones DataPort
- GPS Systems
- Personal Digital Assistants
- Factory Automation
- Serial to Parallel/Parallel to Serial Converter
- Point-of-Sale Systems
- Gaming Terminals
- Multimedia Systems
