SCC2692AC1A44,518
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SCC2692A |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2, DUART |
| Number of I/O | 15 |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 3.6864MHz |
| Supply Current-Max | 10mA |
| Address Bus Width | 4 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| With Auto Flow Control | Yes |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | ROHS3 Compliant |
SCC2692AC1A44,518 Overview
In the 44-LCC (J-Lead) package, you can get the product at a low cost.UART is possible to transmUART on 2, DUART channels.When UART comes to packaging, Tape & Reel (TR) is adopted as the packaging method.As its uP/uC/Peripheral ICs type, SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used.In order to configure this device, 44 terminations are used.For its operation, it requires a supply voltage of 5V.The current status of this electronic part is Obsolete.As a way to communicate data, the board has 2 serial I/Os.Surface Mount is the method for mounting it.During operation, the supply voltage is set to 5V.UART is a type of 44-pin integrated circuUART.This IC measures its clock frequency at 3.6864MHz.Due to a series of similarities, it is included into the subcategory of Serial IO/Communication Controllers.There are some characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter in it.UART is able to operate at the maximum temperature of 70°C.If a power supply of 5V is available, electronic designers can use it with confidence.Basically, it uses SCC2692A as its base part number.Universal asynchronous receiver-transmitter is possible to transfer data using 15 I/Os.10mA is the maximum supply current that is acceptable.
SCC2692AC1A44,518 Features
2 serial I/Os
Clock frequency of 3.6864MHz
Power supplies of 5V
15 I/Os
SCC2692AC1A44,518 Applications
There are a lot of NXP USA Inc. SCC2692AC1A44,518 UARTs applications.
- DTE for Modem Communication Systems
- Cellular data devices
- Multimedia Systems
- Point-of- Sale Terminals
- Wireless Portable Point-of-Sale Terminals
- Network Management
- Point-of-Sale Systems
- Portable Applications
- Battery Operated Instruments
- Ethernet Network to Serial Ports
