SI52112-B3-GM2R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Technology | CMOS |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | HCSL |
| Number of Outputs | 2 |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Operating Supply Current | 17mA |
| uPs/uCs/Peripheral ICs Type | CLOCK GENERATOR, PROCESSOR SPECIFIC |
| Frequency (Max) | 100MHz |
| Input | Clock, Crystal |
| Ratio - Input:Output | 1:2 |
| Primary Clock/Crystal Frequency-Nom | 25MHz |
| PLL | Yes |
| Differential - Input:Output | No/Yes |
| Max Duty Cycle | 55 % |
| Main Purpose | PCI Express (PCIe) |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
SI52112-B3-GM2R Overview
Clock program is accessible in the Tape & Reel (TR) package. There is a 10-WFDFN Exposed Pad-serial number on the packaging of this product that identifies it as being packaged in a case. Surface Mount is the recommended mounting type. Clock program contains 10 terminations. Voltage 3.3V is provided by the part. Using the part's peak reflow temperature, operation NOT SPECIFIED is performed. There are CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs in this device. The device contains 1. normaloperation is restricted to 100MHz frequency. Variations are made in the range of operating temperature -40°C~85°C. The component can supply a voltage of 2.97V~3.63V. This component serves a single purpose PCI Express (PCIe). HCSL is intended to be the output. There are 2012 publised of the part. Circuits application is recommended to mount Circuits application wCircuits applicationh Surface Mount. The device is designed with 10 pins. The supply voltage should be kept at 3.3V. There is the ability to maintain 2 outputs on the device. The supply current of this DAC is typically 17mA.
SI52112-B3-GM2R Features
Mounting Type: Surface Mount
Peak Reflow Temperature (Cel): NOT SPECIFIED
uPs/uCs/Peripheral ICs Type of CLOCK GENERATOR, PROCESSOR SPECIFIC
Include 1 Circuits
run the output at th range of HCSL
with 10 Pins
operate supply voltage at the range of 3.3V
SI52112-B3-GM2R Applications
There are a lot of Silicon Labs SI52112-B3-GM2R application specific timer?applications.
- Broadcast video
- 10/40/100G network line cards
- Printers, scanners, projectors
- DSLAM
- Test and Measurement
- Ethernet Switches, Routers
- Communications
- Ethernet Switches, Routers
- 1 GbE and 10 GbE
- GbE/10 GbE/100 GbE Synchronous Ethernet (ITU-T G.8262)
