Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
36-VFQFN Exposed Pad |
Surface Mount |
YES |
Number of Pins |
36 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tray |
Published |
2001 |
Series |
DSPLL® |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
36 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Type |
Jitter Cleaner |
Subcategory |
Clock Generators |
Voltage - Supply |
1.71V~3.63V |
Terminal Position |
QUAD |
Supply Voltage |
1.8V |
Terminal Pitch |
0.5mm |
Frequency |
200MHz |
Frequency Stability |
20 ppm |
Base Part Number |
SI5317 |
Output |
CML, LVCMOS, LVDS, LVPECL |
Pin Count |
36 |
Number of Outputs |
2 |
Operating Supply Voltage |
3.3V |
Number of Circuits |
1 |
Load Capacitance |
15pF |
Max Supply Current |
279mA |
Input |
Clock, Crystal |
Ratio - Input:Output |
2:2 |
Primary Clock/Crystal Frequency-Nom |
711MHz |
PLL |
Yes with Bypass |
Differential - Input:Output |
Yes/Yes |
Divider/Multiplier |
No/No |
Height |
850μm |
Length |
6mm |
Width |
6mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
RoHS Compliant |
SI5317C-C-GM Overview
It is packaged using the Tray method since it is a clock IC. In the 36-VFQFN Exposed Pad package, there is an embedded clock generator. As you can see, it consists of 36 terminations. For this clock generator ic, a voltage of 1.8V is required. This Clock PLL will be fed by Clock, Crystal as its input. Using 1 circuits, the electronic part's full performance can be accessed. This component can be conveniently installed on the panel thanks to the Surface Mount. This clock PLL works with a supply voltage of 1.71V~3.63V. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. CML, LVCMOS, LVDS, LVPECL logic levels are supported by this RF synthesizer. It has been classified as a Jitter Cleaner electronic part, which means that it is a semiconductor. An IC that generates clocks specifically for microprocessors, this clock PLL is 36-bits in si36e. The related electronic parts of part number SI5317 are listed below. It is possible to connect to the PLL via 36 pins. The supply voltage should be maintained at 3.3V for high efficiency. The device is usually classified as a type of Clock Generators device. An electronic part belonging to the DSPLL? series is being used here. 2 signal outputs maximi2e the output frequency. It is able to realize high efficiency when operating at a frequency of 200MHz. The maximal current supplied for this frequency synthesizer operation reaches 279mA. In terms of load capacitance, analog clock generator is capable of delivering 15pF.
SI5317C-C-GM Features
Available in the 36-VFQFN Exposed Pad
Supply voltage of 1.8V
Operating supply voltage of 3.3V
Load capacitance of 15pF
SI5317C-C-GM Applications
There are a lot of Silicon Labs SI5317C-C-GM Clock Generators applications.
- DVD recorders
- Time to digital converters
- Medical equipment
- Frequency synthesis
- Bluetooth transmitters
- Skew suppression
- Clock recovery
- High-speed optical transport network (OTN)
- Frequency synthesis
- Walkie-talkies