banner_page

SI5368A-C-GQ

3.3V Clock Multiplier, Jitter Attenuator 1.42GHz SI5368 Clock Generators DSPLL? Series 100 Pins 100-TQFP 100 Terminals Surface Mount 1.71V~3.63V Tray


  • Manufacturer: Silicon Labs
  • Nocochips NO: 715-SI5368A-C-GQ
  • Package: 100-TQFP
  • Datasheet: PDF
  • Stock: 147
  • Description: 3.3V Clock Multiplier, Jitter Attenuator 1.42GHz SI5368 Clock Generators DSPLL? Series 100 Pins 100-TQFP 100 Terminals Surface Mount 1.71V~3.63V Tray (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 100-TQFP
Surface Mount YES
Number of Pins 100
Weight 499.688695mg
Operating Temperature -40°C~85°C
Packaging Tray
Published 1997
Series DSPLL®
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 100
Type Clock Multiplier, Jitter Attenuator
Applications SONET;SDH
Voltage - Supply 1.71V~3.63V
Terminal Position QUAD
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 3.3V
Base Part Number SI5368
Output CML, LVCMOS, LVDS, LVPECL
Pin Count 100
Number of Outputs 5
Operating Supply Voltage 2.5V
Number of Circuits 1
Frequency (Max) 1.42GHz
Input Clock
Ratio - Input:Output 4:5
PLL Yes
Differential - Input:Output Yes/Yes
Divider/Multiplier No/Yes
Radiation Hardening No
RoHS Status RoHS Compliant

SI5368A-C-GQ Overview


Clock generator is packaged in the way of Tray. In the 100-TQFP package, there is an embedded clock generator. As a result of this, we can find 100 terminations. This electronic frequency generator requires a voltage of 3.3V. It is designed that the Clock PLL's input should be Clock. A total of 1 circuits are implemented to access the full performance of the electrical part. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 1.42GHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There should be 1.71V~3.63V provided with this RF synthesizer. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. I would like to present to you a frequency synthesizer that is compatible with CML, LVCMOS, LVDS, LVPECL logic levels. As far as electrical parts go, this component can be classified as a Clock Multiplier, Jitter Attenuator component. This clock-generating IC is a 100-bit device designed explicitly for microprocessors. These related electrical parts are available for the base part number SI5368. There are a number of 100 pins that are available on the frequency synthesizers. There is a maximum supply voltage of 2.5V that frequency generators can handle. There is an electronic part in this series that belongs to the DSPLL? family. Clock PLL has 5 signal outputs to maximi5e output frequency. Depending on the application, the frequency synthesizers can be used in SONET;SDH-direction.

SI5368A-C-GQ Features


Available in the 100-TQFP
Supply voltage of 3.3V
Operating supply voltage of 2.5V

SI5368A-C-GQ Applications


There are a lot of Silicon Labs SI5368A-C-GQ Clock Generators applications.

  • Camera systems
  • Symbol synchronization
  • Microwave backhaul IF
  • Integrated phase noise in aerospace systems
  • Antenna automatic tracking
  • GPS systems
  • Clock signals to the high-speed Digital RF circuits
  • Tracking filters
  • Radio receivers
  • DVD recorders

Write a review

Note: HTML is not translated!
    Bad           Good