banner_page

SI5376B-A-GL

1.8V Clock Multiplier, Jitter Attenuator 808MHz Clock Generators DSPLL? Series 80-LBGA 80 Terminals Surface Mount 1.71V~2.75V Tray


  • Manufacturer: Silicon Labs
  • Nocochips NO: 715-SI5376B-A-GL
  • Package: 80-LBGA
  • Datasheet: PDF
  • Stock: 784
  • Description: 1.8V Clock Multiplier, Jitter Attenuator 808MHz Clock Generators DSPLL? Series 80-LBGA 80 Terminals Surface Mount 1.71V~2.75V Tray (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 80-LBGA
Surface Mount YES
Number of Pins 80
Weight 50.008559mg
Operating Temperature -40°C~85°C
Packaging Tray
Published 2003
Series DSPLL®
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 80
ECCN Code EAR99
Type Clock Multiplier, Jitter Attenuator
Voltage - Supply 1.71V~2.75V
Terminal Position BOTTOM
Terminal Form BALL
Supply Voltage 1.8V
Output CML, LVCMOS, LVDS, LVPECL
Operating Supply Voltage 2.5V
Number of Circuits 1
Operating Supply Current 1A
Frequency (Max) 808MHz
Input Clock
Ratio - Input:Output 8:8
Primary Clock/Crystal Frequency-Nom 710MHz
PLL Yes
Differential - Input:Output Yes/Yes
RoHS Status RoHS Compliant

SI5376B-A-GL Overview


This clock IC is packaged using the Tray method. The 80-LBGA package embeds this Clock PLL. In it, there are 80 terminations to be found. Basically, a voltage of 1.8V should be applied to this electronic frequency generator. In this clock generator, Clock is used as the input to the clock. To access the full performance of the electronic component, 1 circuits are implemented. This clock-based frequency generator provides a frequency up to 808MHz Max. With the Surface Mount, it is easy to install this electric component on the panel. Clock PLL works with 1.71V~2.75V supply voltage provided. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. It's compatible with CML, LVCMOS, LVDS, LVPECL logic levels. This electronic component can be classified into Clock Multiplier, Jitter Attenuator. There is a 80 pin that is available on the digital clock generator. Clock PLL is capable of handling a voltage of 2.5V. It is part of the DSPLL? series of electronic components. Time clock generator requires a supply current of 1A to fully function.

SI5376B-A-GL Features


Available in the 80-LBGA
Supply voltage of 1.8V
Operating supply voltage of 2.5V

SI5376B-A-GL Applications


There are a lot of Silicon Labs SI5376B-A-GL Clock Generators applications.

  • Wide area power system
  • Signal demodulation
  • Set-top boxes
  • Communication infrastructure
  • Local oscillator source in receiver
  • Modems
  • VSAT (Small Ground Satellite Station)
  • Mixed mode (analog and digital) applications
  • Clock generation systems
  • Cable television converter boxes

Write a review

Note: HTML is not translated!
    Bad           Good