SIP32429DN-T1-GE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Resistance | 56mOhm |
| Max Power Dissipation | 1.42W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 3.5A |
| Supply Voltage-Min (Vsup) | 6V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 550 μs |
| Switch Type | General Purpose |
| Nominal Input Voltage | 28V |
| Turn-Off Delay Time | 1 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~28V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 56m Ω |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
SIP32429DN-T1-GE4 Overview
The LED driver's packaged as a Tape & Reel (TR).In the 10-VFDFN Exposed Pad package, it is included.This lighting drivere has a mounting type of Surface Mount.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.By default, it is set to output 1.To operate, it needs a supply voltage of Not Required.The maximum output voltage of this LED driver is P-Channel volts.In terms of features, the LED driving board has Slew Rate Controlled, Status Flag.The termination count is 10.The operation is carried out using the 10 pins.As far as functions are concerned, the lighting driver has 1.The maximum output current must drop to 3.5A to meet the operation criteria.Using a voltage of 12V allows for high efficiency.Surface Mount is mounted in the way of this lighting driver.Lighting drivers with 56mOhm resistance are used.Normal operation requires Vsup above 6V.In this case, the analog IC is SPST.To choose from, there are 1 channels.
SIP32429DN-T1-GE4 Features
Supplied from 12V
Resistance of 56mOhm
1 channels
SIP32429DN-T1-GE4 Applications
There are a lot of Vishay Siliconix SIP32429DN-T1-GE4 Power Switches ICs applications.
- Set-Top Boxes
- Storage Drives
- Portable GPS
- Solid-State Drives
- Set-top-box
- Mobile Communication Devices
- Handheld Devices
- Hot Swap
- HDD and SSD
- Hot-Swap Systems
