SN65C3221DB
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO OPERATE WITH A 5V SUPPLY |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 65C3221 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 1mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 1Mbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
SN65C3221DB Overview
With the enhanced 16-SSOP (0.209, 5.30mm Width) package, this driver IC is excellent for driving common LEDs.There is a Tube package for this receiver.The Transceiver can transceiver type enables this part to be used in a wide range of applications.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.Power supply for this differential driver is 3V~5.5V.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.Wide receiver can operate within the range of 3.3V supply voltages efficiently.16 terminations are integrated into this wide receiver for driving and receiving signals from data.As a standard package, this transceiver comes with a 16-pin layout that follows the market standard.The base part number 65C3221 identifies the product type, temperature, package, etc., so you can search for more variants by using it.It is a 16-pin driver IC with enhanced power dissipation controls.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.An important feature of this ic receiver was its 1-bit resolution capability.In the case of this receiver, a resolution of 1 bits is typically specified.This transceiver module is designed to operate from an input voltage supply of 5V.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.It implements 1 transceivers in total.Additionally, the optical transceiver module's CAN ALSO OPERATE WITH A 5V SUPPLY function provides improved signal management accuracy and stability.
SN65C3221DB Features
Tube package
16 pin count
16 pins
SN65C3221DB Applications
There are a lot of Texas Instruments SN65C3221DB Drivers/Receivers/Transceivers applications.
- Telecom applications
- High-speed computer links
- Single to Multimode Fiber Conversion
- Fiber distributed data interface (FDDI)
- Wireless transmission
- Vehicle
- Datacom networking applications
- Home theater wiring-free
- Cordless telephone
- Wireless HD Photography
