SN65C3232EDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES WITH 5V SUPPLY |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | 65C3232 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1mA |
| Propagation Delay | 300 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 1Mbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65C3232EDR Overview
Designed for common LEDs, this driver IC features an enhanced 16-SOIC (0.154, 3.90mm Width) package.This receiver is mounted in the Tape & Reel (TR) package.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver consumes 3V~5.5V for its power supplyAt any given time, there can be up to 2/2 eligible receivers/drivers for this electronic part.IC receiver has been designed primarily for applications operating at -40°C~85°C.This line driver ic can operate efficiently with a supply voltage range of 3.3V.There are 16 terminations in this wide receiver so that signals can be driven from the data and received.The pinouts for this transceiver are standardized to meet the needs of the market.For more variants of this part, try searching with the base part number 65C3232, which indicates the product type, temperature, package, etc.It is a 16-pin driver IC with enhanced power dissipation controls.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.There is typically a resolution of 2 bits specified with this receiver.This transceiver module is designed to operate from an input voltage supply of 5V.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.There are 1 transceivers in total implemented by this IC.The integrator circuit has embedded 2 drivers.Additionally, this optical transceiver module features the ALSO OPERATES WITH 5V SUPPLY function, which improves the stability and accuracy of signal management in general.With this integrating circuit you can drive LEDs of a voltage of up to 1mA. It can be used to drive large displays.
SN65C3232EDR Features
Tape & Reel (TR) package
16 pin count
16 pins
SN65C3232EDR Applications
There are a lot of Texas Instruments SN65C3232EDR Drivers/Receivers/Transceivers applications.
- Wired telephone
- Wireless projection application for business talks
- Long-distance fiber optic network applications
- Automation systems
- Wireless showroom
- Aircraft navigation
- Low power, low voltage systems
- Carrier phase observations
- Copper connection network
- Wireless network systems
