SN65HVD06P
| Parameters | |
|---|---|
| Nominal Supply Current | 15mA |
| Data Rate | 10Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 35mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 70 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 40 ns |
| Supply Voltage1-Nom | 5V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 65HVD06 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
SN65HVD06P Overview
The enhanced 8-DIP (0.300, 7.62mm) package makes it an excellent LED driver.This receiver is mounted in the Tube package.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.This wide receiver can be placed on any Through Hole-type PCB or development board.This differential driver uses 4.5V~5.5V for power supply.Up to 1/1 receivers/drivers can be installed simultaneously on this electronic part.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.Wide receiver can operate within the range of 5V supply voltages efficiently.Wide receiver has 8 terminations built in for driving or receiving signals from data.The transceiver is packaged with 8 market standard pinouts so that it can be easily used.Since the part number 65HVD06 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.The driver IC has improved power dissipation control.As a result of optical transceiver downsizing and high-density Through Hole mounting technologies, its package size has been greatly reduced.An important feature of this ic receiver was its 1-bit resolution capability.In the case of this receiver, a resolution of 1 bits is typically specified.There are two types of input voltage supply available for this IC, 5V.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.This driver IC is designed to operate from a 5V power supply.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.
SN65HVD06P Features
Tube package
8 pin count
8 pins
5V power supply
SN65HVD06P Applications
There are a lot of Texas Instruments SN65HVD06P Drivers/Receivers/Transceivers applications.
- Carrier phase observations
- Notebook
- Shortwave receiver
- Laser diode bonding
- TV signal transmission
- Fiber-to-the-desktop
- Satellite communications networks
- Cordless telephone
- Switching system
- SONET/SDH Network
