SN65HVD11D
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65HVD11 |
| Pin Count | 8 |
| Output Voltage | 1.5V |
| Operating Supply Voltage | 3.3V |
| Interface | RS-485 |
| Operating Supply Current | 15.5mA |
| Nominal Supply Current | 15.5mA |
| Data Rate | 10Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 35mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 70 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 40 ns |
| Max Junction Temperature (Tj) | 145°C |
| Ambient Temperature Range High | 85°C |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
SN65HVD11D Overview
This driver chip is excellent for driving common LEDs due to its enhanced 8-SOIC (0.154, 3.90mm Width) package.Tube package is used for this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.A Surface Mount-type PCB or development board can be used to place this wide receiver.Power supply requirements for this differential driver are 3V~3.6V.As many as 1/1 receivers/drivers are eligible for use on this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.Driver ICs with a supply voltage range of 3.3V can operate efficiently.This wide receiver has 8 terminations for driving and receiving data signals.There are 8 pinouts available on this transceiver which are market standard.With the part number 65HVD11 identifying the product type, temperature, package, etc., you can search with it to see more variants.The driver IC has improved power dissipation control.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.There is usually a 1-bit resolution specified for this receiver when it is used.This transceiver module is designed to operate from an input voltage supply of 3.3V.Line Driver or Receivers is a subcategory of this rf transceiver module.It implements 1 transceivers in total.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 15.5mA.Using 1.5V as a voltage source, Wide receiver is able to deliver voltage.
SN65HVD11D Features
Tube package
8 pin count
8 pins
SN65HVD11D Applications
There are a lot of Texas Instruments SN65HVD11D Drivers/Receivers/Transceivers applications.
- Wired telephone
- SONET/SDH Network
- Wireless multimedia center in smart home
- Indoor ad hoc meeting
- Televisions
- Gigabit Ethernet
- Desktop radio
- WDM transmission
- Copper connection network
- Wireless 3D game
