SN65HVD1793D
| Parameters | |
|---|---|
| Receiver Hysteresis | 50mV |
| Interface Standard | EIA-485; TIA-485 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 50 ns |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.008A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 905mW |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 65HVD1793 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 6mA |
| Propagation Delay | 70 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 10Mbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
SN65HVD1793D Overview
This LED driver IC features an enhanced 14-SOIC (0.154, 3.90mm Width) package for driving common LEDs.The receiver is packaged in a Tube package.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.On any Surface Mount-type PCB or development board, this wide receiver can be placed.With respect to the power supply, this differential driver uses 4.5V~5.5V.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.IC receiver's like this are designed for applications requiring a -40°C~105°C operating temperature.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.This integrated circuit has 14 terminations designed for driving and receiving signals from data.The transceiver is packaged with 14 market standard pinouts so that it can be easily used.As the base part number 65HVD1793 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.It is a 14-pin driver IC with enhanced power dissipation controls.It was possible to achieve a 1-bit resolution through this ic receiver.In the case of this receiver, a resolution of 1 bits is typically specified.There is a voltage input supply of 5V required for the operation of this integrated circuit.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.This driver IC is designed to operate from a 5V power supply.The module isolated transceiver implements a total of 1 transceivers.
SN65HVD1793D Features
Tube package
14 pin count
14 pins
5V power supply
SN65HVD1793D Applications
There are a lot of Texas Instruments SN65HVD1793D Drivers/Receivers/Transceivers applications.
- Cable network front end
- transmission relay
- Single fiber bidirectional application
- Metro access rings
- Shortwave receiver
- Wireless transmission
- Copper connection network
- Wireless modems
- interconnection between computers
- IP cameras
