SN65HVD23P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 65HVD23 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 256 |
| Nominal Supply Current | 11mA |
| Data Rate | 25Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 130mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 35 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 20 ns |
| Supply Voltage1-Nom | 5V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65HVD23P Overview
Due to the enhanced 8-DIP (0.300, 7.62mm) package, this driver IC is excellent for driving common LEDs.The Tube package houses this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.Ideally, you should place this wide receiver on a Through Hole-type PCB or development board.In terms of power supply, this differential driver utilizes 4.5V~5.5V.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.This integrated circuit has 8 terminations designed for driving and receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.Since the base part number 65HVD23 describes the product type, temperature, package, etc., you might get more options by searching with it.This is a 8-pin driver IC with enhanced power dissipation control.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.It is typical for this receiver to have a resolution of 1 bits when it is specified.There are two types of input voltage supply available for this IC, 5V.There is a subcategory called Line Driver or Receivers for this rf transceiver module.It is designed so that it can be operated from a 5V power supply with this driver IC.There are 1 transceivers in total implemented by this IC.A total of 256 circuits are integrated into this transceiver module, making it an extremely complex transceiver module.
SN65HVD23P Features
Tube package
8 pin count
8 pins
5V power supply
SN65HVD23P Applications
There are a lot of Texas Instruments SN65HVD23P Drivers/Receivers/Transceivers applications.
- Vehicle
- VoIP phones
- Data center
- Fiber optic cable connection network
- TV signal transmission
- Thermal management
- Wireless projection application for business talks
- Low power, low voltage systems
- Automation systems
- Wireless HD Photography
