SN65HVD3088EDGK
| Parameters | |
|---|---|
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 900μA |
| Data Rate | 20Mbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 30mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 20 ns |
| Supply Voltage1-Nom | 5V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 65HVD3088 |
SN65HVD3088EDGK Overview
With the enhanced 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, this driver IC is excellent for driving common LEDs.There is a Tube package for this receiver.The Transceiver can transceiver type enables this part to be used in a wide range of applications.On any Surface Mount-type PCB or development board, this wide receiver can be placed.With respect to the power supply, this differential driver uses 4.5V~5.5V.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.With a voltage range of 5V, this driver IC can operate efficiently.In order to drive and receive signals from data, this wide receiver has 8 terminations integrated.The pinouts for this transceiver are standardized to meet the needs of the market.As the base part number 65HVD3088 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.An enhanced power dissipation control is provided by this 8-pin driver IC.Using this ic receiver, you were able to achieve a resolution of 1 bits.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.There are two types of input voltage supply available for this IC, 5V.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.The driver IC in this product is designed so that it can be powered by 5V.The module isolated transceiver implements a total of 1 transceivers.
SN65HVD3088EDGK Features
Tube package
8 pin count
8 pins
5V power supply
SN65HVD3088EDGK Applications
There are a lot of Texas Instruments SN65HVD3088EDGK Drivers/Receivers/Transceivers applications.
- Satellite communication
- Carrier phase observations
- Wireless communication
- Thermal management
- Laser diode bonding
- Satellite communications networks
- Single to Multimode Fiber Conversion
- Cable network front end
- Wireless multimedia center in smart home
- Televisions
