SN65HVD54DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 130.010913mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SIGNALING RATE 5 MBPS |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 65HVD54 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 256 |
| Nominal Supply Current | 8mA |
| Logic Function | Receiver |
| Data Rate | 5Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Interface Standard | EIA-485-A; TIA-485-A |
| Number of Transceivers | 1 |
| Receive Delay-Max | 60 ns |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 46 ns |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.008A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65HVD54DR Overview
This LED driver IC features an enhanced 14-SOIC (0.154, 3.90mm Width) package for driving common LEDs.In this package, the receiver is mounted in the Tape & Reel (TR) format.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.On any Surface Mount-type PCB or development board, this wide receiver can be placed.Power supply for this differential driver is 4.5V~5.5V.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.IC receiver has been designed primarily for applications operating at -40°C~85°C.With a supply voltage range of 5V, this line driver ic operates efficiently.There are 14 terminations in this wide receiver so that signals can be driven from the data and received.The pinouts for this transceiver are standardized to meet the needs of the market.Since the base part number 65HVD54 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.This is a 14-pin driver IC with enhanced power dissipation control.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.It is typical for this receiver to have a resolution of 1 bits when it is specified.This transceiver module is designed to operate from an input voltage supply of 5V.This driver IC is designed to operate from a 5V power supply.There are 1 transceivers in total that this module isolated transceiver implements.A SIGNALING RATE 5 MBPS function is also included in this optical transceiver module, which improves stability and accuracy of signal management.There are total 256 circuits integrated into this transceiver module, and each one has its own function.
SN65HVD54DR Features
Tape & Reel (TR) package
14 pin count
14 pins
5V power supply
SN65HVD54DR Applications
There are a lot of Texas Instruments SN65HVD54DR Drivers/Receivers/Transceivers applications.
- Car alarm systems
- Military satellite communications
- Satellite communication
- 1x/2x Fiber Channel
- Wired telephone
- Wireless smart house
- Servers
- VoIP phones
- transmission relay
- Aircraft navigation
