SN65LVDS105DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 160.004709mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | 5A991.B.1 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 400MHz |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 4 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Temperature Grade | INDUSTRIAL |
| Operating Supply Current | 23mA |
| Power Dissipation | 950mW |
| Propagation Delay | 4.2 ns |
| Supply Current-Max | 61mA |
| Turn On Delay Time | 4.2 ns |
| Data Rate | 400 Mbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Input Characteristics | STANDARD |
| Interface IC Type | LINE TRANSCEIVER |
| Driver Number of Bits | 4 |
| Receiver Number of Bits | 1 |
| Receive Delay-Max | 3.5 ns |
| Transmit Delay-Max | 3.5 ns |
| Supply Voltage1-Nom | 3.3V |
| Supply Voltage1-Min | 3V |
| Supply Voltage1-Max | 3.6V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN65LVDS105DG4 Overview
Packaging is convenient because power buffer comes in SOIC.The package is ready for power buffer in Rail/Tube pieces.The op amp buffer has 16 terminals.Temperature 260 is its peak reflow temperature.When powered by 3.3V voltage, this splitter is capable of carrying out a number of demanding tasks.A Power buffer's pinout begins with its 16 pins.The 16 pins are on it.A mounting hole is provided for mounting on PCBs and other boards.In addition to the power buffer, other Line Driver or Receivers also play an important role.A voltage of 23mA is required to operate this power buffer.Normal operation requires 3.3V operating supply voltage.Using 1-Bits as the receiver, it transmits data.There is no point in feeding the repeter voltages above 3.6V.A 4 element interface repeater signal is shown here.Lower temperatures than -40°C are unsuitable for it.Temperatures above 85°C should not be exceeded.
SN65LVDS105DG4 Features
A standard Line Driver or Receivers.
1-Bit receiver.
SN65LVDS105DG4 Applications
There are a lot of Texas Instruments SN65LVDS105DG4 Signal Buffers, Repeaters, Splitters applications.
- SATA SSDs or HDDs
- Laptop Computers (for External Video Cards)
- Test Equipment
- Add/Drop Muxes
- Data or Clock Signal Amplification
- DSLAMs
- Industrial Server
- Multidrop Buses
- Network Switches/Routers
- Protection Switching
