SN65LVDS386DGG
| Parameters | |
|---|---|
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 16 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 65LVDS386 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 70mA |
| Power Dissipation | 2.094W |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 4 ns |
| Data Rate | 250Mbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | LVDS |
| Input Characteristics | DIFFERENTIAL |
| Number of Drivers/Receivers | 0/4 |
| Supply Voltage1-Nom | 3.3V |
| Output Low Current-Max | 0.008A |
| Number of Receivers | 16 |
| High Level Input Current-Max | 0.00001A |
| Height | 1.2mm |
| Length | 17mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 64 |
| Weight | 262.601633mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 65LVDS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
SN65LVDS386DGG Overview
Due to the enhanced 64-TFSOP (0.240, 6.10mm Width) package, this driver IC is excellent for driving common LEDs.There is a Tube package for this receiver.Since this is a Receiver can transceiver, many solutions can use it for a variety of functions.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.A power supply of 3V~3.6V is used by this differential driver.During operation, this electronic part may have up to 0/4 eligible receivers/drivers.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.3.3V is the supply voltage range that this line driver ic can efficiently operate with.Integrated into this wide receiver are 64 terminations that are used for driving and receiving signals from data.Transceiver comes with 64 standard pinouts that meet the market's requirements.Since the base part number 65LVDS386 describes the product type, temperature, package, etc., you might get more options by searching with it.It is a 64-pin driver IC with enhanced power dissipation controls.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.There is a supply voltage of 3.3V on the input of this transceiver module, so it can be operated from that source.This rf transceiver module can have?up to 16 eligible receivers on the field at once.?A power-saving technique is used in this integrating circuit, whintegrating circuith belongs to the 65LVDS series.
SN65LVDS386DGG Features
Tube package
64 pin count
64 pins
65LVDS series
SN65LVDS386DGG Applications
There are a lot of Texas Instruments SN65LVDS386DGG Drivers/Receivers/Transceivers applications.
- Precision geodetic measurement
- Wireless multimedia center in smart home
- Transmission stations
- Cell phones
- SONET/SDH Network
- Wireless transmission
- Desktop PC
- Metro access rings
- Satellite ground stations
- Datacom networking applications
