SN65LVDS390PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.99264mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 65LVDS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Base Part Number | 65LVDS390 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Operating Supply Current | 18mA |
| Nominal Supply Current | 18mA |
| Power Dissipation | 774mW |
| Max Supply Current | 18mA |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 4 ns |
| Data Rate | 200Mbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | LVDS |
| Input Characteristics | DIFFERENTIAL |
| Number of Drivers/Receivers | 0/4 |
| ESD Protection | Yes |
| Supply Voltage1-Nom | 3.3V |
| Output Low Current-Max | 0.008A |
| Number of Receivers | 4 |
| High Level Input Current-Max | 0.00001A |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDS390PW Overview
Driver ICs with enhanced 16-TSSOP (0.173, 4.40mm Width) packages are excellent for driving LEDs with common characteristics.The package of this receiver is Tube.The Receiver can transceiver technology has enabled this part to power many solutions for a variety of uses.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.This differential driver uses 3V~3.6V for power supply.As many as 0/4 eligible receivers/drivers can be used simultaneously with this electronic part.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.An output voltage range of 3.3V is sufficient to run this line driver ic efficiently.This wide receiver has 16 terminations for driving and receiving data signals.It is packaged with 16 pinouts that are market standard for this particular transceiver.With the part number 65LVDS390 identifying the product type, temperature, package, etc., you can search with it to see more variants.The driver IC has improved power dissipation control.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.An input voltage supply of 3.3V is required to operate the transceiver module.The module isolated transceiver contains 4 receivers.This integrating circuit is able to drive LEDs with an input voltage of 18mA.When the input current reaches or exceeds 18mA, this can transceiver could have mal-functions.One of the integrating circuits in the 65LVDS series represents a technique for enhancing power effintegrating circuitiency.
SN65LVDS390PW Features
Tube package
16 pin count
16 pins
65LVDS series
SN65LVDS390PW Applications
There are a lot of Texas Instruments SN65LVDS390PW Drivers/Receivers/Transceivers applications.
- Car alarm systems
- SONET/SDH Network
- Wireless multimedia center in smart home
- Ethernet circuitry
- Structural bonding
- Thermal management
- Satellite ground stations
- Fiber optic cable connection network
- Wireless interactive experience
- Desktop PC
