SN65MLVD200AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65MLVD200 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Operating Supply Current | 24mA |
| Nominal Supply Current | 24mA |
| Data Rate | 100Mbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | LVDS, Multipoint |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 25mV |
| Number of Transceivers | 1 |
| Input Current | 24mA |
| Receive Delay-Max | 6 ns |
| Transmit Delay-Max | 3.5 ns |
| Supply Voltage1-Nom | 3.3V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65MLVD200AD Overview
This driver chip is excellent for driving common LEDs due to its enhanced 8-SOIC (0.154, 3.90mm Width) package.In the Tube package, this receiver is mounted.As a Transceiver can transceiver, this part has enabled many applications to be served.On any Surface Mount-type PCB or development board, this wide receiver can be placed.A differential driver like this uses 3V~3.6V of power.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.An output voltage range of 3.3V is sufficient to run this line driver ic efficiently.In order to drive and receive signals from data, this wide receiver has 8 terminations integrated.This transceiver is packaged with 8 market standard pinoutsThe base part number 65MLVD200 identifies the product type, temperature, package, etc., so you can search for more variants by using it.8-pin driver IC with improved power dissipation control.It is important to note that this ic receiver had a maximum resolution of 1 bits.In the case of this receiver, a resolution of 1 bits is typically specified.There is a 3.3V input voltage supply that can be used to operate this transceiver module.There is a subcategory named Line Driver or Receivers for this rf transceiver module.ICs implement a total of 1 transceivers.It is capable of driving LEDs with a voltage of 24mA as the input voltage to this integrating circuit.
SN65MLVD200AD Features
Tube package
8 pin count
8 pins
SN65MLVD200AD Applications
There are a lot of Texas Instruments SN65MLVD200AD Drivers/Receivers/Transceivers applications.
- Laser diode bonding
- Datacom networking applications
- Televisions
- Wireless multimedia center in smart home
- Shortwave receiver
- Fiber distributed data interface (FDDI)
- Notebook
- Precision engineering measurement
- LAN, SAN, WAN (local, storage, work area networks)
- Cable network front end
