banner_page

SN65MLVD200ADR

8 Terminations3.3V 8 Pin 65MLVD200 Receivers1 Bits 1/1 Drivers/Receivers1 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN65MLVD200ADR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 592
  • Description: 8 Terminations3.3V 8 Pin 65MLVD200 Receivers1 Bits 1/1 Drivers/Receivers1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Weight 72.603129mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Type Transceiver
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Line Driver or Receivers
Technology BICMOS
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Base Part Number 65MLVD200
Pin Count 8
Operating Supply Voltage 3.3V
Nominal Supply Current 24mA
Data Rate 100Mbps
Output Characteristics DIFFERENTIAL
Differential Output YES
Output Polarity COMPLEMENTARY
Protocol LVDS, Multipoint
Input Characteristics DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers 1/1
Driver Number of Bits 1
Receiver Number of Bits 1
Duplex Half
Receiver Hysteresis 25mV
Number of Transceivers 1
Receive Delay-Max 6 ns
Simplex/Duplex Half Duplex
Transmit Delay-Max 3.5 ns
Supply Voltage1-Nom 3.3V
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN65MLVD200ADR Overview


LED drivers benefit from this IC's enhanced 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) package is used for this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.On any Surface Mount-type PCB or development board, you can install this wide receiver.A power supply of 3V~3.6V is used by this differential driver.Up to 1/1 receivers/drivers can be installed simultaneously on this electronic part.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.An operating voltage range of 3.3V is suitable for this line driver ic.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.This transceiver is packaged with 8 market standard pinoutsThis part number 65MLVD200 can be used to search for more variants based on the product type, temperature, package, etc.An enhanced power dissipation control driver IC featuring 8 pins.It provided a 1-bit resolution capability with this ic receiver.It is typical for this receiver to have a resolution of 1 bits when it is specified.This transceiver module is designed to operate from an input voltage supply of 3.3V.There is a subcategory called Line Driver or Receivers for this rf transceiver module.In total, there are 1 transceivers implemented by this module isolated transceiver.

SN65MLVD200ADR Features


Tape & Reel (TR) package
8 pin count
8 pins

SN65MLVD200ADR Applications


There are a lot of Texas Instruments SN65MLVD200ADR Drivers/Receivers/Transceivers applications.

  • Ethernet circuitry
  • Wireless HD Photography
  • Wireless communication
  • Single fiber bidirectional application
  • Wireless transmission
  • WDM transmission
  • Routers
  • Desktop PC
  • Bridges
  • LAN, SAN, WAN (local, storage, work area networks)

Write a review

Note: HTML is not translated!
    Bad           Good