SN74ABT273DWRG4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 150MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Current - Output | 64mA |
| Propagation Delay | 6.8 ns |
| Turn On Delay Time | 2.5 ns |
| Family | ABT |
| Logic Function | D-Type |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Prop. Delay@Nom-Sup | 7.3 ns |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Power Supply Current-Max (ICC) | 30mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74ABT273DWRG4 Overview
SOICis the packaging method. There is a TTLoutput configured with it. The list contains 1 elements. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is powered from a supply voltage of 5V. In this case, the D flip flop belongs to the ABTfamily. There is an electronic component mounted in the way of Surface Mount. 20pins are included in its design. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This RS flip flops is a part number FF/Latches. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. It operates from 5V power supplies. In order to ensure high efficiency, the supply voltage should remain at 5V. A high level output current of -32mAis set. A 64mAvalue is set for low-level output current. Operating temperatures should be lower than 85°C. Temperatures above -40°Cshould be used. It operates with the minimal supply voltage of 4.5V. 5.5Vis its maximum supply voltage. The frequency can be set to 150MHz. It uses D FLIP-FLOPas its logic IC. There are 1 functions available on the JK flip flop. It is equipped with 20 pin count. As a result of its output current of 64mA, it is very flexible in terms of design.
SN74ABT273DWRG4 Features
20 pins
5V power supplies
1 Functions
20 pin count
SN74ABT273DWRG4 Applications
There are a lot of Texas Instruments SN74ABT273DWRG4 Flip Flops applications.
- Reduced system switching noise
- Circuit Design
- Pattern generators
- Supports Live Insertion
- Functionally equivalent to the MC10/100EL29
- Instrumentation
- Balanced 24 mA output drivers
- Dynamic threshold performance
- Consumer
- Test & Measurement
