SN74ABT273PWRG4
| Parameters | |
|---|---|
| Number of Bits per Element | 8 |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Power Supply Current-Max (ICC) | 30mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.15mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 150MHz |
| Pin Count | 20 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Current - Output | 64mA |
| Propagation Delay | 6.8 ns |
| Turn On Delay Time | 2.5 ns |
| Family | ABT |
| Logic Function | D-Type |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.064 A |
SN74ABT273PWRG4 Overview
It is packaged in the way of TSSOP. TTLis the output configured for it. There are 1 elements in it. There are 20 terminations,The power supply voltage is 5V. This D flip flop belongs to the family of ABT. Electronic part Surface Mountis mounted in the way. With its 20pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. The RS flip flops belongs to FF/Latches base part number. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. It operates from 5V power supplies. Optimal efficiency requires a supply voltage of 5V. The high level output current is set to -32mA. A 64mAvalue is set for low-level output current. It is recommended that the operating temperature be lower than 85°C. Temperatures above -40°Cshould be used. A minimum supply voltage of 4.5V is required for these RS flip flops to operate. 5.5Vis the maximum supply voltage it supports. It is possible to obtain a frequency of 150MHz. In this case, it uses a D FLIP-FLOP logic IC. A total of 1 functions are available on the T flip flop. 20pins are provided on the D latch. With an output current of 64mA, this flip flop offers maximum design flexibility.
SN74ABT273PWRG4 Features
20 pins
5V power supplies
1 Functions
20 pin count
SN74ABT273PWRG4 Applications
There are a lot of Texas Instruments SN74ABT273PWRG4 Flip Flops applications.
- Storage Registers
- Bounce elimination switch
- Computers
- Modulo – n – counter
- Matched Rise and Fall
- Differential Individual
- Shift Registers
- QML qualified product
- Automotive
- Clock pulse
