SN74ABT373PWR
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ABT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Max Supply Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 7.2 ns |
| Quiescent Current | 30mA |
| Turn On Delay Time | 4.6 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| Control Type | ENABLE LOW |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| JESD-609 Code | e4 |
SN74ABT373PWR Overview
A package called 20-TSSOP (0.173, 4.40mm Width) contains it. Packaged in the way of Cut Tape (CT). It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. A Surface Mount mount is used for mounting this electronic part. It operates at a voltage of 4.5V~5.5V. During operation, the temperature is set at -40°C~85°C. This FPGA is part of the 74ABT series. The design of this electronic part contains 8 bits. This device is designed with 20 terminations. There is no doubt that it belongs to the family 74ABT373. It operates with a supply voltage of 5V. With 20 pins, it is equipped. It is part of the family of electronic devices called ABT. In addition, it is designed with a pin number of 20. This electronic part is mounted in the way of Surface Mount. This device has 2 ports. FF/Latches is the subcategory of this part. There are 5V power supplies required for this machine to operate. On the basis of its reliability, this device is well suited for TR. The output current of 64mA makes it feature maximum design flexibility. High efficiency requires maintaining the supply voltage at 5V. It consumes 30mA of quiescent current without being affected by outside factors. 8 circuits are used to provide this superior level of flexibility.
SN74ABT373PWR Features
20-TSSOP (0.173, 4.40mm Width) package
74ABT series
8 Bits
74ABT373 family
20 pin count
20 pins
5V power supplies
SN74ABT373PWR Applications
There are a lot of Texas Instruments SN74ABT373PWR Latches applications.
- Shift right register
- Motor Drives
- A/D converters
- Programmable binary
- Hammer Device Information
- Automotive Body Electronics
- Display driver
- Shift right with parallel loading
- Automotive Infotainment
- Pattern Generators
