SN74ABT8652DWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Additional Feature | INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MULTIPLEXED TRANSMISSION OF REGISTERED/REAL TIME DATA |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.5V~5.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT8652 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 5.3 ns |
| Family | ABT |
| Logic Function | AND, Transceiver |
| Output Characteristics | 3-STATE |
| Logic Type | Scan Test Device with Bus Transceiver and Registers |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 5.5 ns |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Control Type | INDEPENDENT CONTROL |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74ABT8652DWR Overview
A packaging method based on Tape & Reel (TR) is employed.There is a copy of it in the 28-SOIC (0.295, 7.50mm Width) package.The voltage of 4.5V~5.5V is supplied to make sure that the device is able to operate normally.Basically, it is an electronic part mounted with Surface Mount.In terms of its operating temperature, it is set at -40°C~85°C.Memory has a bit size of 8.There are a number of similarities among the electronic parts of the 74ABT series.Based on its base part number 74ABT8652, related parts can be found.Adding up all component pins equals 28.Through 28 terminations, signals are prevented from reflecting off the end of transmission lines.Mounted using Surface Mount.Normal use can be kept when the minimum supply voltage is kept at 4.5V.A maximum supply voltage of 5.5V can maintain normal use.It belongs to the Bus Driver/Transceivers subcategory.It is important to maintain the power supplies of 5V for ease of use.In INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MULTIPLEXED TRANSMISSION OF REGISTERED/REAL TIME DATA, it provides high performance.Optimised for high quality and reliability, this electronic component belongs to the family of ABT.2 ports are included in it.Packing is handled by TAPE AND REEL.The control type is INDEPENDENT CONTROL.With 1 circuits, it is configured.
SN74ABT8652DWR Features
SN74ABT8652DWR Applications
There are a lot of Texas Instruments SN74ABT8652DWR Specialty Logic ICs applications.
- Solenoids
- Car alarm systems
- Sensor reporting
- Cable network front end
- High-speed computer links
- Ethernet circuitry
- Changeing the frequency from IF to RF
- Optical sub-assembly (OSA)
- Cell phones
- Tuner
