SN74ABTH182502APM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Weight | 342.689036mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Series | 74ABTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SCANNABLE |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ABTH182502 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 18-Bit |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Propagation Delay | 15 ns |
| Quiescent Current | 21mA |
| Turn On Delay Time | 15 ns |
| Family | ABT |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | Scan Test Universal Bus Transceiver |
| Trigger Type | POSITIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Translation | N/A |
| Height | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABTH182502APM Overview
The package 64-LQFP includes it. In this case, it is packaged in the same way as Tray. The superior flexibility of 18-Bit circuits is achieved through their use. A Scan Test Universal Bus Transceiver is the logic type of the electrical device that we are discussing. This electronic part is mounted in the way of Surface Mount. A higher operating temperature than -40°C~85°C is recommended. The high/low output current of 32mA 64mA enables maximum design flexibility. An FPGA belonging to the 74ABTH series is a type of FPGA. The supply voltage is 4.5V~5.5V. As it belongs to the 74ABTH182502 family, it should be taken into consideration. There is one type of termination that is called the 64 termination, which consists in terminating a transmission line with a device that has an impedance that matches the characteristic impedance of the line itself. It is important to keep the supply voltage above 5V for normal operation. There are 64 pins on it. An electronic part designed with 18 Bits is used in this product. Transmission lines are terminated with 2 terminations, which are devices matching the line's characteristic impedance. The electronic part is mounted in Surface Mount-direction. It has 64 pins. The device belongs to the ABT family of electronic devices. 5V power supplies are used to power the device. It consists of 2 elements. It is configured with a trigger that uses a POSITIVE EDGE-value. In addition to this, SCANNABLE is another characteristic of it. There is a voltage of 5V applied to the supply voltage of this electrical part. A quiescent current 21mA is consumed without being affected by external factors.
SN74ABTH182502APM Features
64-LQFP package
74ABTH series
74ABTH182502 family
64 pin count
64 pins
5V power supplies
2 elements
SN74ABTH182502APM Applications
There are a lot of Texas Instruments SN74ABTH182502APM Universal Bus Functions applications.
- Car refrigerator
- Fax machine
- Roof distributed power station
- MPPT function (maximum power point tracking)
- Temperature detector circuits
- Solar energy generation
- Automotive voltage monitoring
- Electronic and electrical project circuits
- Mobile caravan
- Massager
