SN74ACT533DBRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ACT533 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 2.5 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT533DBRG4 Overview
The package in which it is embedded is named 20-SSOP (0.209, 5.30mm Width). As a result, it has a packaging of Tape & Reel (TR). It is configured with an output of Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. The supply voltage of the device is 4.5V~5.5V. The temperature at which the machine is operating is -40°C~85°C. It is a type of FPGA belonging to the 74ACT series. The design of this electronic part contains 8 bits. In this device, there are 20 terminations. The family it belongs to is 74ACT533. The device is operated when the supply voltage is set to 5V. It is equipped with 20 pin count. It is a member of the ACT family of electronic devices. 20 pins are used in its design. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports on board, which are all available at the same time. FF/Latches is the subcategory of this part. The maximal supply voltage (Vsup) reaches 5.5V. It operates from 5V power supplies. A voltage greater than 4.5V must be supplied as a power supply (Vsup). An electronic circuit can be found on 8 input lines. Based on its reliable performance, this device is appropriate for TAPE AND REEL. The 24mA output current gives it maximum design flexibility.
SN74ACT533DBRG4 Features
20-SSOP (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT533 family
20 pin count
20 pins
5V power supplies
SN74ACT533DBRG4 Applications
There are a lot of Texas Instruments SN74ACT533DBRG4 Latches applications.
- Shift right register
- Automotive HEV/EV Powertrain
- Counter timers
- Shift right with parallel loading
- Parallel-to-Serial Data Conversion
- Multi-line decoders
- Shift register
- Shift left register
- Meter applications
- Communication systems
