SN74ACT564DWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT564 |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 90MHz |
| Propagation Delay | 11.5 ns |
| Turn On Delay Time | 6.5 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT564DWR Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. It is contained within the Tape & Reel (TR)package. The output it is configured with uses Tri-State, Inverted. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at a voltage of 4.5V~5.5V. Temperature is set to -40°C~85°C TA. D-Typeis the type of this D latch. FPGAs belonging to the 74ACTseries contain this type of chip. You should not exceed 90MHzin the output frequency of the device. D latch consists of 1 elements. Despite external influences, it consumes 4μAof quiescent current. The number of terminations is 20. Members of the 74ACT564family make up this object. A voltage of 5V provides power to the D latch. The input capacitance of this JK flip flopis 4.5pF farads. ACTis the family of this D flip flop. It is mounted by the way of Surface Mount. As you can see from the design, it has pins with 20. There is a clock edge trigger type of Positive Edgeon this device. The part is included in Bus Driver/Transceiver. The design is based on 8bits. The superior flexibility is achieved through the use of 8 circuits. In light of its reliable performance, this T flip flop is well suited for TR. The D latch operates on 5V volts. The D flip flop is embedded with 2ports. If high efficiency is desired, the supply voltage should be kept at 5V. With a current output of 24mA , it offers maximum design flexibility. It has 3lines.
SN74ACT564DWR Features
Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies
SN74ACT564DWR Applications
There are a lot of Texas Instruments SN74ACT564DWR Flip Flops applications.
- Counters
- Frequency Dividers
- High Performance Logic for test systems
- Buffered Clock
- ESD performance
- Synchronous counter
- Common Clocks
- Storage Registers
- Differential Individual
- Divide a clock signal by 2 or 4
