SN74AHC157DGVR
| Parameters | |
|---|---|
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 7.5 ns |
| Family | AHC/VHC/H/U/V |
| Number of Inputs | 8 |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Bandwidth | 110MHz |
| Max I(ol) | 0.05 A |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 3.6mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 41.900595mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Max Power Dissipation | 1.7W |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC157 |
| Pin Count | 16 |
SN74AHC157DGVR Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-TFSOP (0.173, 4.40mm Width).As a result, it is packaged in a way that is referred to as Cut Tape (CT).Digital switch ic adheres to a mounting method of Surface Mount.Multiplexer is the analog IC that the multiplexers uses.By keeping the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2V~5.5V.provides digital controlled switch's digital controlled switch'sMultiplexers of the 74AHC series can be used in a wide range of applications.The basic configuration includes 16 terminations.You can also find related parts by using its logic switch base part number of 74AHC157.The multiplexer's system is powered by 3.3V volts.This turn signal switch has a total of 16 component pins.It is the end of conductors that is represented by GULL WING.Single is employed as its supply type.This multiplexer ic is configured with 16 pins.The mount is in Surface Mount.The logic switch is a member of the family of AHC/VHC/H/U/V.As a result, signal multiplexer provides a total of 2 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.The turn signal switch contains 1 outputs designed to operate.The multiplexer is equipped with 8 inputs.The switches package is packaged in accordance with the TR method.In the turn signal switch's circuit, there are 4 channels used for transmission.
SN74AHC157DGVR Features
Supplied in the 16-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74AHC157DGVR Applications
There are a lot of Texas Instruments SN74AHC157DGVR Signal Switches / Multiplexers / Decoders applications.
- HD surveillance system
- Communication system
- War field flying robot with a night vision flying camera
- Arithmetic Logic Units
- Audio transmission
- Data demultiplexing
- Recording transmission
- To select different task for memory in microprocessor memory systems
- Microprocessor input/output systems
- To select different devices in microprocessor output
