SN74AHC373DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 17 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC373DW Overview
A package called 20-SOIC (0.295, 7.50mm Width) contains it. This package has the format of Tube. It uses Tri-State as the output. D-Type Transparent Latch is the logic type of this electrical device. The way in which this electronic part is mounted is Surface Mount. A voltage of 2V~5.5V is used as the supply voltage for this device. There is a temperature of -40°C~85°C at which the system operates. In the 74AHC series, this FPGA is located. 8 Bits are used in the design of this electronic part. In this device, there are 20 terminations. The family 74AHC373 includes it. The device works with a voltage of 3.3V for its supply voltage. The device is equipped with 20 pins. It is a member of the AHC/VHC/H/U/V family of electronic devices. With the design of the board, there are only 20 pins. It is mounted according to the Surface Mount method. This device has a total of 2 ports. Subcategory Bus Driver/Transceiver includes this part. The maximal supply voltage (Vsup) reaches 5.5V. There are 2/5.5V power supplies required for this machine to operate. It is recommended that the supply voltage (Vsup) be greater than 2V. Electronic circuits comprise 3 input lines. As the output current is 8mA, the design flexibility is maximum. Without external influences, it consumes 4μA quiescent current. Its maximum current supply (ICC) reaches 0.04mA.
SN74AHC373DW Features
20-SOIC (0.295, 7.50mm Width) package
74AHC series
8 Bits
74AHC373 family
20 pin count
20 pins
2/5.5V power supplies
SN74AHC373DW Applications
There are a lot of Texas Instruments SN74AHC373DW Latches applications.
- Counting
- Up-Down Johnson
- Automotive ADAS
- Shift left register
- Buffer register
- Parallel-to-Serial Data Conversion
- Flip-flops
- Control circuits
- TV Set-top Boxes
- Buffer/Storage Registers
