SN74AHC595PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 170MHz |
| Base Part Number | 74AHC595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 18.5 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 1 |
| Input Current | 1μA |
| Number of Output Lines | 9 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC595PW Overview
There is a 16-TSSOP (0.173, 4.40mm Width) package embedded with the device. 16 is the number of terminations on the chip. A Tube case is used to pack it. 3.3V is the part's operating supply voltage. 16 pins are located on the device. The recommended mounting method is Surface Mount. This electronic component is classified as AHC/VHC/H/U/V. In Surface Mount, this component is mounted. There is a range of operating temperatures -40°C~125°C. During operation, the voltage is within the range of 2V~5.5V. The 74AHC series is associated with this electrical component. Based on the 74AHC595 family, you can search for similar parts. This section has the following additional features: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. There must be a minimum supply voltage (Vsup) of 2V for this part. A device with 1 input lines is available. There is a capability to deliver voltage at 2.5/5V. Vsup cannot exceed 5.5V for this part. The number of output lines to be operated is 9. There is 170MHz frequency set on the device.
SN74AHC595PW Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHC595 family
It supplies 2.5/5V power
With 9 output lines
SN74AHC595PW Applications
There are a lot of Texas Instruments SN74AHC595PW Shift Registers applications.
- Data manipulation
- Parallel data
- Pulse Extenders
- store data in digital form
- Flash Memory
- Generate time delay toward digital circuits
- Interconnectors
- Cache memory in CPU
- ROM Chips
- 8-bit data storage
