SN74AHCT139DGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 41.900595mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT139 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Throw Configuration | DP4T |
| Propagation Delay | 10.5 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 10.5 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Bandwidth | 110MHz |
| Max I(ol) | 0.008 A |
| Prop. Delay@Nom-Sup | 8.5 ns |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.2mm |
| Length | 3.6mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT139DGVR Overview
Providing this information in the 16-TFSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.It is packaged in the way of Cut Tape (CT).In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses an analog IC Decoder/Demultiplexer.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.Multiplexers from the 74AHCT series can be used in a wide range of applications.There is a design for terminating 16 as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74AHCT139.For multiplexer's system, a voltage of 5V is supplied.In this turn signal switch, there are 16 components that can be connected to each pin.As a result, conductors end at GULL WING.There is a supply type of Single employed as part of this supply.A configuration of 16 pins is used.The mounting point is Surface Mount.I would like to refer to the logic switch as a member of the AHCT/VHCT/VT family.In this signal multiplexer, there are 4 bits provided.It is provided that 5V has a power supply in order to function normally.As part of the operation of this turn signal switch, there are 4 outputs.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.It consumes 2μA current of multiplexer ic without external influences.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.TR is used to package the switches.2 circuits are formed for the normal operation of the digitalswitch.
SN74AHCT139DGVR Features
Supplied in the 16-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74AHCT139DGVR Applications
There are a lot of Texas Instruments SN74AHCT139DGVR Signal Switches / Multiplexers / Decoders applications.
- Make full adder
- Medium scale TV wall
- Signal router
- Automatic health monitoring systems
- Automatic Monitoring systems
- Analog to digital conversion
- Microprocessor input/output systems
- Make half adder
- HDMI applications
- Night vision cameras
