SN74AHCT573DWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT573DWRG4 Overview
A package called 20-SOIC (0.295, 7.50mm Width) contains it. The package is in the form of Tape & Reel (TR). It uses Tri-State as the output. D-Type Transparent Latch is the logic type of this electrical device. The electronic component is mounted according to the Surface Mount method. A voltage of 4.5V~5.5V is used as the supply voltage for this device. There is -40°C~85°C operating temperature. It is a type of FPGA belonging to the 74AHCT series. 8 Bits are used in the design of this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It belongs to 74AHCT573 family. The device works with a voltage of 5V for its supply voltage. 20 pins are included. It is part of the family of electronic devices called AHCT/VHCT/VT. 20 pins are used in its design. The electronic part is mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. There is a subcategory of FF/Latches for this part. There are 5V power supplies required for this machine to operate. There are 8 input lines in which electronic circuits are present. Based on its reliable performance, this device is well suited to TR. The 8mA output current gives it maximum design flexibility. High efficiency requires a voltage supply of 5V. It also has characteristics of BROADSIDE VERSION OF 373. As its maximal power current (ICC) reaches 0.04mA, it is able to operate.
SN74AHCT573DWRG4 Features
20-SOIC (0.295, 7.50mm Width) package
74AHCT series
8 Bits
74AHCT573 family
20 pin count
20 pins
5V power supplies
SN74AHCT573DWRG4 Applications
There are a lot of Texas Instruments SN74AHCT573DWRG4 Latches applications.
- Shift left with parallel loading
- Four-bit storage with output enable
- Lamp and Display (LED)
- Counter control
- Ring counter
- Serial Output Data Queuing
- A/D and D/A conversion
- Storage
- Sample and hold register
- Phase comparator
