SN74AHCT574PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Clock Frequency | 115MHz |
| Propagation Delay | 10.6 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT574PWR Overview
20-TSSOP (0.173, 4.40mm Width)is the packaging method. A package named Cut Tape (CT)includes it. T flip flop uses Tri-State, Non-Invertedas its output configuration. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 4.5V~5.5Vis required for its operation. The operating temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. JK flip flop belongs to the 74AHCTseries of FPGAs. A frequency of 115MHzshould be the maximum output frequency. D latch consists of 1 elements. A total of 20terminations have been recorded. You can search similar parts based on 74AHCT574. A voltage of 5V is used to power it. Input capacitance of this device is 3pF farads. An electronic device belonging to the family AHCT/VHCT/VTcan be found here. Electronic part Surface Mountis mounted in the way. It is designed with 20 pins. The clock edge trigger type for this device is Positive Edge. It is part of the FF/Latchesbase part number family. Flip flops designed with 8bits are used in this part. The superior flexibility of this product is achieved by using 8 circuits. In view of its reliability, this D flip flop is a good fit for TR. It runs on 5Vvolts of power. The D flip flop is embedded with 2ports. Optimal efficiency requires a supply voltage of 5V. It offers maximum design flexibility with its output current of 8mA. A total of 3input lines have been provided. Despite external influences, it consumes 4μAof quiescent current.
SN74AHCT574PWR Features
Cut Tape (CT) package
74AHCT series
20 pins
8 Bits
5V power supplies
SN74AHCT574PWR Applications
There are a lot of Texas Instruments SN74AHCT574PWR Flip Flops applications.
- Single Up Count-Control Line
- ESD performance
- Guaranteed simultaneous switching noise level
- ESD protection
- Bus hold
- Buffered Clock
- Clock pulse
- Modulo – n – counter
- Shift registers
- Supports Live Insertion
