SN74AHCT594N
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 115MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHCT594 |
| Function | Serial to Parallel |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 10.7 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 1 |
| Input Current | 20μA |
| Number of Output Lines | 9 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 955.690774mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AHCT |
| JESD-609 Code | e4 |
SN74AHCT594N Overview
Embedded in a package of type 16-DIP (0.300, 7.62mm), the device is available for use. Taking the total number of terminations on the chip and adding them up, we get 16. The Tube case contains it. There is 5V operating supply voltage listed on the part. There are 16 pins on the device. The recommended mounting method is Through Hole. Electronic components are categorized as AHCT/VHCT/VT. This component is mounted in the way of Through Hole. A temperature range of -40°C~85°C is used for operation. The voltage supplied to it is within the range of 4.5V~5.5V. In this case, the electrical component belongs to the series 74AHCT. Based on the 74AHCT594 family, you can search for similar parts. It is noted that the operating supply voltage of this chip falls within the range 5V. Taking note of the following additional details: PARALLEL OUTPUT IS REGISTERED. There are 1 input lines available in the device. Voltage can be delivered at 5V by the device. It is necessary to operate 9 output lines. The device runs at 115MHz.
SN74AHCT594N Features
With 16 pins
Mounted in Through Hole type.
Based on 74AHCT594 family
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74AHCT594N Applications
There are a lot of Texas Instruments SN74AHCT594N Shift Registers applications.
- Pattern Recognizers
- Parallel data
- Serial to parallel converter
- LED matrix control
- 8-bit data storage
- Generate time delay toward digital circuits
- 7-segment display control
- Data Processors
- Data manipulation
- Remote control holding register
