SN74AHCT74MDREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 140MHz |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Number of Output Lines | 1 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 65000000Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT74MDREP Overview
14-SOIC (0.154, 3.90mm Width)is the packaging method. The Tape & Reel (TR)package contains it. As configured, the output uses Differential. The trigger configured with it uses Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at a voltage of 4.5V~5.5V. The operating temperature is -55°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74AHCT series. It should not exceed 140MHzin terms of its output frequency. There is 2μA quiescent consumption. A total of 14 terminations have been made. If you search by 74AHCT74, you will find similar parts. It is powered from a supply voltage of 5V. A JK flip flop with a 2pFfarad input capacitance is used here. AHCT/VHCT/VTis the family of this D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. This device has Positive Edgeas its clock edge trigger type. There is a FF/Latchesbase part number assigned to the RS flip flops. The superior flexibility of this product is achieved by using 2 circuits. This D flip flop is well suited for TR based on its reliable performance. A total of 5V power supplies are needed to run it. If high efficiency is desired, the supply voltage should be kept at 5V. It operates with 1 output lines.
SN74AHCT74MDREP Features
Tape & Reel (TR) package
74AHCT series
14 pins
5V power supplies
SN74AHCT74MDREP Applications
There are a lot of Texas Instruments SN74AHCT74MDREP Flip Flops applications.
- Divide a clock signal by 2 or 4
- Pattern generators
- Matched Rise and Fall
- Storage registers
- Shift registers
- Counters
- Individual Asynchronous Resets
- Storage Registers
- Dynamic threshold performance
- Computing
