SN74ALS299DWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.000539mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 19 ns |
| Turn On Delay Time | 25 ns |
| Family | ALS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 10 |
| fmax-Min | 30 MHz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74ALS299DWE4 Overview
SOIC is the package in which the device is embedded. 20 is the total number of terminations on the chip. There is a Rail/Tube case containing it. This part has an operating supply voltage of 5V. It is equipped with a pin count of 20. The recommended mounting method is Surface Mount. It is a component of the ALS. In terms of supply voltage, this chip operates within the range of 5V. Additionally, this section contains the following: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. The device has a total of 10 input lines. There is a capability to deliver voltage at 5V. IC chip bits total 8. 20 pins are present on it. It should be used below 70°C. Operation of this device requires a value greater than 0°C. It is used under the 5.5V supply voltage. This supply voltage is employed higher than 4.5V. 1 circuits are present in this device.
SN74ALS299DWE4 Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
SN74ALS299DWE4 Applications
There are a lot of Texas Instruments SN74ALS299DWE4 Shift Registers applications.
- Interconnectors
- Output expansion
- temporary data storage
- Remote control holding register
- ROM Chips
- Pattern Recognizers
- Dual-rank shift, hold, and bus applications
- Delay Line
- Pseudo Random Pattern Generator
- Sequence generator
