SN74ALS873BDWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLEAR |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS873 |
| Pin Count | 24 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 4:4 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 29mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 22 ns |
| Turn On Delay Time | 8 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 14 ns |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS873BDWR Overview
The package in which it is embedded is named 24-SOIC (0.295, 7.50mm Width). This package has the format of Tape & Reel (TR). There is a Tri-State output configured. This electrical device has Logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. There is a temperature of 0°C~70°C at which the system operates. 74ALS is the series number of this FPGA. The design of this electronic part contains 8 bits. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It belongs to 74ALS873 family. A 5V voltage supply is required for operation. There are 24 pins on it. This electronic device belongs to the family of ALS. The device has 24 pins. Surface Mount is used to mount this electronic part. 2 ports are available on this device. Subcategory FF/Latches includes this part. A total of 5V power supplies are needed to run it. Based on its reliable performance, this device is suitable for TR. As the output current is 24mA, the design flexibility is maximum. High efficiency requires a supply voltage of 5V. Input lines are converted into binary equivalents by 8 output lines. In total, it has 2 elements. There are also characteristics of WITH CLEAR associated with it.
SN74ALS873BDWR Features
24-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS873 family
24 pin count
24 pins
5V power supplies
2 elements
SN74ALS873BDWR Applications
There are a lot of Texas Instruments SN74ALS873BDWR Latches applications.
- Automotive ADAS
- Instrumentation
- Shift Registers
- Registers
- Sample and hold register
- General-Purpose Register
- Four-bit storage with output enable
- Serial Output Register
- Double bus register system
- Clocks
