Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
56 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74ALVCH |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
Additional Feature |
WITH CLOCK ENABLE FOR EACH REGISTER; IN B TO A PATH FOUR STAGE PIPELINE IS PROVIDED |
HTS Code |
8542.39.00.01 |
Packing Method |
TAPE AND REEL |
Voltage - Supply |
1.65V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74ALVCH162525 |
Pin Count |
56 |
Qualification Status |
Not Qualified |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
3.3V |
Supply Voltage-Min (Vsup) |
1.65V |
Number of Circuits |
18-Bit |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
18 |
Propagation Delay |
5.4 ns |
Family |
ALVC/VCX/A |
Logic Function |
Transceiver |
Output Characteristics |
3-STATE WITH SERIES RESISTOR |
Current - Output High, Low |
24mA 24mA; 12mA 12mA |
Logic Type |
Universal Bus Transceiver, CMOS |
Max I(ol) |
0.024 A |
Prop. Delay@Nom-Sup |
4.7 ns |
Trigger Type |
POSITIVE EDGE |
Control Type |
INDEPENDENT CONTROL |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height Seated (Max) |
2.79mm |
Length |
18.415mm |
Width |
7.5mm |
RoHS Status |
ROHS3 Compliant |
SN74ALVCH162525DLR Overview
A copy of it is embedded in the package 56-BSSOP (0.295, 7.50mm Width). It is packaged in the way of Tape & Reel (TR). In order to achieve this superior flexibility, 18-Bit circuits are used. There is a logic type Universal Bus Transceiver, CMOS associated with this electrical device. There is an electronic part that is mounted in a Surface Mount-shaped arrangement. It is recommended that the operating temperature be higher than -40°C~85°C. It features maximum design flexibility thanks to its High/Low output current. A 74ALVCH series FPGA is a type of FPGA that is part of the family of FPGAs. With a voltage supply of 1.65V~3.6V, it is able to operate. 74ALVCH162525 family is its parent. It is also possible to terminate a transmission line with a 56 termination, which is where the transmission line is closed with a device that matches the characteristic impedance of the transmission line. As a rule of thumb, the supply voltage should be maintained above 1.8V to ensure normal operation. It is equipped with 56 pin count. A 18-Bit electronic part was designed for this application. 2 terminations, on the other hand, are the practice of terminating a transmission line with a device that matches its characteristic impedance. It is mounted in the way of Surface Mount so that this electronic part can be seen. 56 pins are used in the design of this board. There is an electronic device in this family called ALVC/VCX/A. It reaches 3.6V when the maximum supply voltage (Vsup) is reached. The supply voltage (Vsup) should be greater than 1.65V. A 3.3V power supply is used to operate it. There is a trigger configured with POSITIVE EDGE for this device. This device is well suited for TAPE AND REEL based on its reliable performance. WITH CLOCK ENABLE FOR EACH REGISTER; IN B TO A PATH FOUR STAGE PIPELINE IS PROVIDED is one of the characteristics of this type of system as well.
SN74ALVCH162525DLR Features
56-BSSOP (0.295, 7.50mm Width) package
74ALVCH series
74ALVCH162525 family
56 pin count
56 pins
3.3V power supplies
SN74ALVCH162525DLR Applications
There are a lot of Texas Instruments SN74ALVCH162525DLR Universal Bus Functions applications.
- Cell phone
- Safety thermostat
- Electrical tools
- Digital stopwatches
- Air conditioner
- Overcurrent/Short circuit protection
- Digital Electronics
- automatic temperature control circuits
- Tablets
- Wearable Health and Fitness Devices