SN74ALVTH16374VR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 48 |
| Weight | 123.490523mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ALVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.3V~2.7V 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVTH16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 16 |
| Clock Frequency | 250MHz |
| Propagation Delay | 3.2 ns |
| Turn On Delay Time | 1.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 100μA |
| Current - Output High, Low | 8mA 24mA; 32mA 64mA |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 5mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 1 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALVTH16374VR Overview
As a result, it is packaged as 48-TFSOP (0.173, 4.40mm Width). The package Cut Tape (CT)contains it. T flip flop uses Tri-State, Non-Invertedas its output configuration. In the configuration of the trigger, Positive Edgeis used. Surface Mountis positioned in the way of this electronic part. Powered by a 2.3V~2.7V 3V~3.6Vvolt supply, it operates as follows. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the 74ALVTH series. You should not exceed 250MHzin its output frequency. D latch consists of 2 elements. There is a consumption of 100μAof quiescent energy. In 48terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The object belongs to the 74ALVTH16374 family. The power supply voltage is 2.5V. This T flip flop has a capacitance of 3.5pF farads at the input. This electronic part is mounted in the way of Surface Mount. A total of 48pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. An electronic part designed with 16bits is used in this application. As a result of its reliability, this D flip flop is ideally suited for TR. This flip flop has a total of 2ports. The 64mA output current allows it to be designed with the greatest amount of flexibility. It is designed with 1 output lines. It is reported that there are 3 input lines.
SN74ALVTH16374VR Features
Cut Tape (CT) package
74ALVTH series
48 pins
16 Bits
SN74ALVTH16374VR Applications
There are a lot of Texas Instruments SN74ALVTH16374VR Flip Flops applications.
- CMOS Process
- Functionally equivalent to the MC10/100EL29
- ATE
- ESCC
- Counters
- Storage registers
- Supports Live Insertion
- Guaranteed simultaneous switching noise level
- Data storage
- Common Clocks
