Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
56 |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74AUC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
HTS Code |
8542.39.00.01 |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
0.8V~2.7V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.2V |
Terminal Pitch |
0.5mm |
Base Part Number |
74AUC16501 |
Pin Count |
56 |
Supply Voltage-Max (Vsup) |
2.7V |
Power Supplies |
1.2/2.5V |
Supply Voltage-Min (Vsup) |
0.8V |
Number of Circuits |
18-Bit |
Load Capacitance |
15pF |
Number of Ports |
2 |
Number of Bits |
18 |
Family |
AUC |
Logic Function |
Transceiver |
Direction |
Bidirectional |
Output Characteristics |
3-STATE |
Current - Output High, Low |
9mA 9mA |
Logic Type |
Universal Bus Transceiver |
Output Polarity |
TRUE |
Max I(ol) |
0.005 A |
Prop. Delay@Nom-Sup |
4 ns |
Trigger Type |
POSITIVE EDGE |
Propagation Delay (tpd) |
3.8 ns |
Control Type |
INDEPENDENT CONTROL |
Translation |
N/A |
Height Seated (Max) |
1.2mm |
Length |
14mm |
Width |
6.1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
SN74AUC16501DGGR Overview
The package 56-TFSOP (0.240, 6.10mm Width) contains this file embedded in it. In the way of Cut Tape (CT), it is packaged. It achieves superior flexibility through 18-Bit circuits. The Logic type of this electrical device is Universal Bus Transceiver. A Surface Mount-shaped electronic component is mounted here. It is better to have an operating temperature higher than -40°C~85°C. Due to its high and low output current options, 9mA 9mA's maximum level of flexibility is achieved when it comes to designing its features. FPGAs in the 74AUC series are this type. Powered by 0.8V~2.7V, it operates on a voltage of V. As it belongs to the 74AUC16501 family, it should be taken into consideration. There are a number of termination types, including 56 terminations, which is the term that refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. When the supply voltage is above 1.2V, the device will operate normally. It is equipped with 56 pin count. With 18 Bits, you can design electronic parts in a very flexible way. The 2 termination is a practice in which a transmission line is terminated with an impedance matching device at the end of the line in order to match the characteristic impedance of the line. Surface Mount is used to mount this electronic part. 56 pins are used in its design. This one belongs to the AUC family of electronic devices, and there are a number of other devices like it that are part of this family. 2.7V is the maximum supply voltage (Vsup). There should be a difference between Vsup and 0.8V in the supply voltage. Powered by 1.2/2.5V batteries, it operates on a 12V system. It uses POSITIVE EDGE for its trigger. This device is well suited for TAPE AND REEL based on its reliable performance.
SN74AUC16501DGGR Features
56-TFSOP (0.240, 6.10mm Width) package
74AUC series
74AUC16501 family
56 pin count
56 pins
1.2/2.5V power supplies
SN74AUC16501DGGR Applications
There are a lot of Texas Instruments SN74AUC16501DGGR Universal Bus Functions applications.
- Overcurrent/Short circuit protection
- Electronic Points of Sale
- Television
- Car refrigerator
- Push-button lock
- Electrical tools
- Computer
- automatic temperature control circuits
- Small and medium distributed photovoltaic power generation system
- Automatic digital control circuits