SN74AVC2T245RSWR
| Parameters | |
|---|---|
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74AVC2T245 |
| Pin Count | 10 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Output Current | 12mA |
| Number of Bits | 2 |
| Propagation Delay | 2.4 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 5.1 ns |
| Family | AVC |
| Logic Function | Inverting, Transceiver, Translator |
| Data Rate | 500Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | REGISTERED BUS TRANSCEIVER |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Control Type | COMMON CONTROL |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~3.6V |
| Voltage - VCCB | 1.2V~3.6V |
| Height | 550μm |
| Length | 1.8mm |
| Width | 1.4mm |
| Thickness | 450μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN |
| Number of Pins | 10 |
| Weight | 6.095147mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
SN74AVC2T245RSWR Overview
Level translators is embedded in the 10-UFQFN package.Packaged in the way of Tape & Reel (TR).Level translators uses Tri-State, Non-Inverted as the output.There is a translator type of Voltage Level for this electrical device.Surface Mount is used to mount this electronic part.Bidirectional is the type of channel for this electrical device.Level translators is -40°C~85°C TA at the operating temperature.The superior flexibility of the system is achieved through its use of 1 circuits.When it comes to terminating a transmission line, there are 10 terminations.Parts that are related to 74AVC2T245 can be identified based on its base part number.A supply voltage of 1.5V is used to power the device.Level translators is equipped wLevel translatorsh 10 pin count.The device is a member of the 74AVC series.Level translators has 10 pins.Electronic parts with 2 bits are designed for this application.The supply voltage is limited to 3.6V.This device requires a minimum voltage of 1.2V.There is a configuration of 1.2V~3.6V for the VCCA supply rail.A VCCB supply rail is configured as 1.2V~3.6V.Surface Mount is used for mounting.Channel count is 2.In Bus Driver/Transceiver, this part is included.There is REGISTERED BUS TRANSCEIVER logic IC in it.There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.In the world of electronics, this electronic device belongs to the family of AVC.In the absence of external influences, it consumes 8μA of quiescent current.This device has been rated to be suitable for TR based upon the reliability of its performance.The output current of 12mA gives it maximum flexibility in design.
SN74AVC2T245RSWR Features
10-UFQFN package
1 circuits
10 pin count
74AVC series
10 pins
SN74AVC2T245RSWR Applications
There are a lot of Texas Instruments SN74AVC2T245RSWR voltage translators & level shifters applications.
- Driving indicator LEDs or buzzers
- Debouncing a mechanical switch
- Servers
- Handset
- Advanced Driver Assistance System (ADAS)
- Power-sensitive applications
- SDIO
- TVs
- Tablet PCs
- Printers and Other Peripherals
