Parameters |
Package / Case |
48-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
48 |
Weight |
223.195796mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Series |
74AVCBH |
JESD-609 Code |
e4 |
Feature |
Over Voltage Protection |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
1.5V |
Terminal Pitch |
0.5mm |
Base Part Number |
74AVCBH164245 |
Pin Count |
48 |
Number of Outputs |
16 |
Output Type |
Tri-State, Non-Inverted |
Polarity |
Non-Inverting |
Power Supplies |
1.5/3.3V |
Number of Circuits |
2 |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.4V |
Number of Ports |
2 |
Output Current |
12mA |
Number of Bits |
8 |
Propagation Delay |
10 ns |
Turn On Delay Time |
10 ns |
Family |
AVC |
Logic Function |
Transceiver, Translator |
Data Rate |
400 Mbps |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS TRANSCEIVER |
High Level Output Current |
-12mA |
Channel Type |
Bidirectional |
Low Level Output Current |
12mA |
Control Type |
COMMON CONTROL |
Translation |
1.5/3.3V&1.5/3.3V |
Translator Type |
Voltage Level |
Voltage - VCCA |
1.4V~3.6V |
Voltage - VCCB |
1.4V~3.6V |
Channels per Circuit |
8 |
Height |
1.2mm |
Length |
12.5mm |
Width |
6.1mm |
Thickness |
1.15mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 16 hours ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
SN74AVCBH164245GR Overview
There is an embedded version of it in package 48-TFSOP (0.240, 6.10mm Width).Packaged as Tape & Reel (TR).In this configuration, the output is set to Tri-State, Non-Inverted.There is a translator type of Voltage Level for this electrical device.Surface Mount is used to mount this electronic part.Bidirectional is the type of channel for this electrical device.The operating temperature is -40°C~85°C TA.The circuit's superior flexibility is achieved through the use of 2 circuits.Ending a transmission line involves 48 terminations.The base part number 74AVCBH164245 can be used to find its related parts.The supply voltage of this device is 1.5V, and it is powered by it.There are 48 pins on this device.There is one device in the 74AVCBH series, and it belongs to that series.The board has 48 pins.8 Bits are used in the design of this electronic part.There is a maximum voltage of 3.6V supported.The minimal voltage for operation is 1.4V.In the VCCA supply rail, 1.4V~3.6V is configured.VCCB is configured with a supply rail that starts at 1.4V~3.6V.Electronic parts are mounted using Surface Mount.I would classify it as part of the group of Bus Driver/Transceivers.In this case, the logic IC is BUS TRANSCEIVER.2 terminations are used to end transmission lines by matching their characteristic impedance with the device.In terms of electronic devices, this one is in the AVC family.When operating, Over Voltage Protection is guaranteed.A 1.5/3.3V power supply is required for it to operate.This device has the capability of providing reliable performance, so it is suitable for use with TR.Due to the 12mA output current, it provides maximum design flexibility.There are 16 outputs configured on this device.
SN74AVCBH164245GR Features
48-TFSOP (0.240, 6.10mm Width) package
2 circuits
48 pin count
74AVCBH series
48 pins
1.5/3.3V power supplies
16 outputs
SN74AVCBH164245GR Applications
There are a lot of Texas Instruments SN74AVCBH164245GR voltage translators & level shifters applications.
- Controlled Baseline
- SDIO
- Data and Clock Transmission Over Backplane
- TVs
- Telecom
- Eliminate Slow or Noisy Input Signals
- Industrial Equipment
- Tablet
- Test Site
- ADAS Fusion