Parameters |
Number of Inputs |
8 |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
500MHz |
Output Polarity |
TRUE |
High Level Output Current |
-64mA |
Low Level Output Current |
64mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Height |
1.2mm |
Length |
3.6mm |
Width |
4.4mm |
Thickness |
1.05mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
41.900595mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CB |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Multiplexer/Demultiplexer |
Resistance |
10Ohm |
Subcategory |
Other Logic ICs |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.4mm |
Base Part Number |
74CB3Q3253 |
Pin Count |
16 |
Number of Outputs |
4 |
Circuit |
2 x 4:1 |
Supply Voltage-Max (Vsup) |
3.6V |
Number of Circuits |
2 |
Operating Supply Current |
2mA |
Throw Configuration |
SP4T |
Propagation Delay |
180 ps |
Quiescent Current |
2mA |
Turn On Delay Time |
6.7 ns |
Logic Function |
Demultiplexer, Multiplexer |
SN74CB3Q3253DGVR Overview
Due to the lack of space on the board, digital switch is provided in the 16-TFSOP (0.173, 4.40mm Width).Tape & Reel (TR) is the packaging method.For mounting, digital switch ic uses the method Surface Mount.For the analog part of the multiplexers, an IC Multiplexer/Demultiplexer is used.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.With a supply voltage of 2.3V~3.6V, designers have greater flexibility of digital controlled switch.Since they are members of the 74CB series, they can be used in a wide variety of applications.This configuration includes 16 terminations as part of its basic functionality.To find signal switch's related components, a base part number of 74CB3Q3253 may also be used.The multiplexer is supplied with 2.5V voltage.This turn signal switch consists of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.As a type of supply, Single is employed.This multiplexer ic is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.The turn signal switch contains 4 outputs designed to operate.In electronic terms, the digital switch ic is classified as part number Other Logic ICs.Without external influences, it consumes 2mA current of multiplexer ic.This multiplexer is equipped with 8 inputs and 8 outputs.The signal switching is packaged by TR. This signal switching operates at a resistance of 10Ohm.As a result of the operation of the digitalswitch, 2 circuits are formed.It is possible to maintain stability of the multiplexers if the supply voltage to the load is set at 2mA.
SN74CB3Q3253DGVR Features
Supplied in the 16-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply current of 2mA
SN74CB3Q3253DGVR Applications
There are a lot of Texas Instruments SN74CB3Q3253DGVR Signal Switches / Multiplexers / Decoders applications.
- Automation system
- Enabling different rows of memory depending on address in memory chips
- RF-based home automation system
- Injectors
- Arithmetic Logic Units
- Data communication
- Automatic Monitoring systems
- D/A converters
- LVDS
- Microprocessor input/output systems