SN74CB3Q3345PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Resistance | 9Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES WITH 3.3V SUPPLY |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 20 |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 700μA |
| Current - Output | 30mA |
| Number of Bits | 8 |
| Propagation Delay | 7.7 ns |
| Quiescent Current | 2mA |
| Turn On Delay Time | 7.7 ns |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 500MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CB3Q3345PWG4 Overview
It is included in the TSSOP in order to save board space.As a result, it is packaged in a way that is referred to as Rail/Tube.The basic configuration includes 20 terminations.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemIn this turn signal switch, there are 20 components that can be connected to each pin.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply of Single.It is configured with 20 pins.It is mounted in the way of Surface Mount.In the CB3Q/3VH/3C/2B family, the logic switch is included.There are 8 bits signal multiplexer provides.During mux switch's normal operation, 2.5/3.3V is provided with a power supply.Bus Driver/Transceivers is the classification for this the digital switch ic.In the absence of external influences, it consumes 2mA current of multiplexer ic.2 is the resistance at which it operates.A resistance of 9Ohm is used to operate it.The maximum temperature for this signal switch is 85°C.It is recommended that the minimum operating temperature of the multiplexer be kept at -40°C.The device is specified to operate at a maximum supply voltage of 3.6V in accordance with the applicable device specification.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 2.3V.It also provides improved characteristics of ALSO OPERATES WITH 3.3V SUPPLY.IC BUS DRIVER is used for the logic of this chip.
SN74CB3Q3345PWG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES WITH 3.3V SUPPLY
BUS DRIVER as the logic IC
SN74CB3Q3345PWG4 Applications
There are a lot of Texas Instruments SN74CB3Q3345PWG4 Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- Idle motor
- Medium scale TV wall
- A robotic vehicle with the metal detector
- Frequency multiplexing system
- Small scale TV wall
- Paper plants
- LVDS
- Home automation system
- Memory chips
