SN74CB3T3383DBQR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Weight | 129.500622mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| Type | Bus FET Exchange Switch |
| Resistance | 5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 5 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CB3T3383 |
| Pin Count | 24 |
| Circuit | 5 x 2:2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Ports | 4 |
| Number of Bits | 10 |
| Throw Configuration | DPDT |
| Propagation Delay | 250 ps |
| Family | CB3T/3VT |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CB3T3383DBQR Overview
Due to the fact that it is provided in the 24-SSOP (0.154, 3.90mm Width), digital switch allows the board to be compacted.In this case, it is packaged as Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.For the analog part of the multiplexers, an IC Bus FET Exchange Switch is used.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.These multiplexers are members of the 74CB series, which provide extensive application potential.Its basic configuration includes terminations in the 24 range.Its logic switch base part number is 74CB3T3383 which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 2.5V is supplied.This turn signal switch has 24 component pins.It is the end of conductors that is represented by GULL WING.As a type of supply, Single is employed.This multiplexer ic is configured with 24 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CB3T/3VT family.As a result, signal multiplexer provides a total of 10 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2.3V.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.There is a power supply provided for the mux switch's normal operation of 2.5/3.3V.This is an the digital switch ic that is classified as Other Logic ICs.The resistance of the signal switching is 4.This signal switching operates at a resistance of 5Ohm.
SN74CB3T3383DBQR Features
Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
SN74CB3T3383DBQR Applications
There are a lot of Texas Instruments SN74CB3T3383DBQR Signal Switches / Multiplexers / Decoders applications.
- Signal router
- Idle motor
- Time division multiplexing system
- Implementing boolean functions with multiple variables
- Robotic vehicles
- Speed synchronization of multiple motors in industries
- HDMI applications
- Computer memory
- Electronically controlled engine system
- Decimal decoder
