SN74CBT3245AGQNR
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT3245 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFBGA |
| Number of Pins | 20 |
| Weight | 21.687385mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBT |
| Pbfree Code | no |
| Part Status | Obsolete |
SN74CBT3245AGQNR Overview
This is a relatively small item of digital switch that is included in the 20-VFBGA in order to save space on the board.The package is in the form of Cut Tape (CT).Digital switch ic adheres to a mounting method of Surface Mount.In the multiplexers, the analog IC is indicated by Bus Switch.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.Multiplexers in the 74CBT series are suitable for a wide range of applications.Among its basic features are 20 terminations.The part number for 74CBT3245 can be used to find its logic switch related parts as well.The multiplexer is supplied with 5V voltage.This turn signal switch has a total of 20 component pins.It is the end of conductors that is represented by BALL.Its supply type is Single, which is used as the source of power.There are 20 pins on it.The mounting is in the way of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.As a result, signal multiplexer provides a total of 8 bits.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.During mux switch's normal operation, 5V is provided with a power supply.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.2 is the resistance at which it operates.The resistance of the signal switching is 7Ohm.
SN74CBT3245AGQNR Features
Supplied in the 20-VFBGA package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3245AGQNR Applications
There are a lot of Texas Instruments SN74CBT3245AGQNR Signal Switches / Multiplexers / Decoders applications.
- Memory system of computers
- Image transmission
- Medical industry
- Analog to digital conversion
- Telephone network
- PCIe
- Electronic circuits
- Metal detectors
- Automatic Monitoring systems
- LVDS
