Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
74CBT3306 |
Pin Count |
8 |
Operating Supply Voltage |
5V |
Circuit |
1 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Channels |
2 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
1 |
Throw Configuration |
SPST |
Propagation Delay |
5.6 ns |
Quiescent Current |
3μA |
Turn On Delay Time |
5.6 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT3306DR Overview
In order to save board space, digital switch is located in the 8-SOIC (0.154, 3.90mm Width).It is packaged in the way of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers of the 74CBT series can be used in a wide range of applications.This configuration includes 8 terminations as part of its basic functionality.In addition, it also has a base part number of 74CBT3306, which can be used to find related parts.The multiplexer's system works with 5V voltage.This turn signal switch has a total of 8 component pins.A conductor terminates at GULL WING.In this case, Single is employed as the supply type.The board is configured with 8 pins.The mount is in Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.There are 1 bits in signal multiplexer.Keep Vsup at 4V to avoid unnecessary failures.For mux switch's normal operation, there is a power supply provided at 5V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.In the absence of external influences, it consumes 3μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in a way which is consistent with TR.2 ports are used for some other peripheral signal switchings to plug in.The resistance of the signal switching is 7Ohm.This turn signal switch's circuit is based on a circuit with 2 channels.Higher switches' flexibility is provided by providing 64mA as the output current.
SN74CBT3306DR Features
Supplied in the 8-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3306DR Applications
There are a lot of Texas Instruments SN74CBT3306DR Signal Switches / Multiplexers / Decoders applications.
- Communication system
- GLAN
- CNC machines
- Electronically controlled engine system
- Automatic Monitoring systems
- Analog, digital or video signal switching
- Night vision cameras
- CPU memory location identification
- HDMI applications
- Speed control of medern motors