SN74CBT3345CDGVR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBT3345 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Throw Configuration | SPST |
| Propagation Delay | 150 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CBT3345CDGVR Overview
Providing this information in the 20-TFSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.It is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.In the multiplexers, the analog IC Bus Switch is used.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.Since they are members of the 74CBT series, they can be used in a wide variety of applications.As parts of its basic configuration, 20 terminations are desgined.In addition, it also has a base part number of 74CBT3345, which can be used to find related parts.The multiplexer's system is powered by 5V volts.In this turn signal switch, there are 20 component pins.GULL WING represents the end of conductors.There is a type of supply Single that is employed in this case.The board is configured with 20 pins.The multiplexer ic is mounted in the direction of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.In the signal multiplexer, there are 8 bits available.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.It is provided that 5V has a power supply in order to function normally.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.Not being affected by the external factors, consumes 3μA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.As far as the resistance is concerned, it operates with 2.It operates with a resistance of 12Ohm.For higher switches' flexibility, the output current is set to 64mA.
SN74CBT3345CDGVR Features
Supplied in the 20-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3345CDGVR Applications
There are a lot of Texas Instruments SN74CBT3345CDGVR Signal Switches / Multiplexers / Decoders applications.
- Home automation system
- Make full adder
- Decimal decoder
- Image transmission
- Automatic Monitoring systems
- A/D converters
- A robotic vehicle with the metal detector
- Robotic vehicles
- HD surveillance system
- War field flying robot with a night vision flying camera
